/* --------------------------- Functional Range ---------------------------- */
-#define USB_CFG_HAVE_INTRIN_ENDPOINT 0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
/* Define this to 1 if you want to compile a version with two endpoints: The
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
* number).
* (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM.
*/
-#define USB_CFG_INTR_POLL_INTERVAL 10
+#define USB_CFG_INTR_POLL_INTERVAL 20
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
-#define USB_CFG_IMPLEMENT_FN_WRITE 0
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of
* bytes.
*/
-#define USB_CFG_IMPLEMENT_FN_READ 0
+#define USB_CFG_IMPLEMENT_FN_READ 1
/* Set this to 1 if you need to send control replies which are generated
* "on the fly" when usbFunctionRead() is called. If you only want to send
* data from a static buffer, set it to 0 and return the data from
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
* the implications!
*/
-#define USB_CFG_DEVICE_ID 0xdc, 0x05 /* = 0x05dc = 1500 */
+#define USB_CFG_DEVICE_ID 0xdf, 0x05 /* = 0x05dc = 1500 */
/* This is the ID of the product, low byte first. It is interpreted in the
* scope of the vendor ID. If you have registered your own VID with usb.org
* or if you have licensed a PID from somebody else, define it here. Otherwise
#define USB_CFG_DEVICE_VERSION 0x00, 0x01
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
-#define USB_CFG_VENDOR_NAME_LEN 8
+#define USB_CFG_VENDOR_NAME 'w', 'w', 'w', '.', 'd', 'c', 't', 't', 'e', 'c', 'h', '.', 'c', 'o', 'm'
+#define USB_CFG_VENDOR_NAME_LEN 15
/* These two values define the vendor name returned by the USB device. The name
* must be given as a list of characters under single quotes. The characters
* are interpreted as Unicode (UTF-16) entities.
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
* details.
*/
-#define USB_CFG_DEVICE_NAME 'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 8
+#define USB_CFG_DEVICE_NAME 'U', 'S', 'B', 'R', 'e', 'l', 'a', 'y', '4'
+#define USB_CFG_DEVICE_NAME_LEN 9
/* Same as above for the device name. If you don't want a device name, undefine
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
* you use a shared VID/PID.
* to fine tune control over USB descriptors such as the string descriptor
* for the serial number.
*/
-#define USB_CFG_DEVICE_CLASS 0xff /* set to 0 if deferred to interface */
+#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
* Class 0xff is "vendor specific".
*/
-#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */
+#define USB_CFG_INTERFACE_CLASS 3 /* HID */
#define USB_CFG_INTERFACE_SUBCLASS 0
#define USB_CFG_INTERFACE_PROTOCOL 0
/* See USB specification if you want to conform to an existing device class or
* HID class is 3, no subclass and protocol required (but may be useful!)
* CDC class is 2, use subclass 2 and protocol 1 for ACM
*/
-/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 22
/* Define this to the length of the HID report descriptor, if you implement
* an HID device. Otherwise don't define it or define it to 0.
* If you use this define, you must add a PROGMEM character array named
* };
*/
-#define CONFIG_DESCRIPTOR_SIZE 41
-
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
#define USB_CFG_DESCR_PROPS_STRINGS 0
projects / energenie-attiny.git / blobdiff