X-Git-Url: https://the.earth.li/gitweb/?p=energenie-attiny.git;a=blobdiff_plain;f=usbconfig.h;fp=usbconfig.h;h=656ddb886ece1085b93acdf0a94b8f6f044e7bc6;hp=207af65d29f7b26477e55999b09bc9cac2f7b019;hb=70570add8918865d23b06aecd1209e55e52ee5b6;hpb=4db519a89591d5fa67575b24ca992320348803f7

diff --git a/usbconfig.h b/usbconfig.h
index 207af65..656ddb8 100644
--- a/usbconfig.h
+++ b/usbconfig.h
@@ -76,7 +76,7 @@ section at the end of this file).
 
 /* --------------------------- Functional Range ---------------------------- */
 
-#define USB_CFG_HAVE_INTRIN_ENDPOINT    0
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
 /* Define this to 1 if you want to compile a version with two endpoints: The
  * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
  * number).
@@ -111,7 +111,7 @@ section at the end of this file).
  * (e.g. HID), but never want to send any data. This option saves a couple
  * of bytes in flash memory and the transmit buffers in RAM.
  */
-#define USB_CFG_INTR_POLL_INTERVAL      10
+#define USB_CFG_INTR_POLL_INTERVAL      20
 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll
  * interval. The value is in milliseconds and must not be less than 10 ms for
  * low speed devices.
@@ -125,12 +125,12 @@ section at the end of this file).
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]
  */
-#define USB_CFG_IMPLEMENT_FN_WRITE      0
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
  * transfers. Set it to 0 if you don't need it and want to save a couple of
  * bytes.
  */
-#define USB_CFG_IMPLEMENT_FN_READ       0
+#define USB_CFG_IMPLEMENT_FN_READ       1
 /* Set this to 1 if you need to send control replies which are generated
  * "on the fly" when usbFunctionRead() is called. If you only want to send
  * data from a static buffer, set it to 0 and return the data from
@@ -229,7 +229,7 @@ section at the end of this file).
  * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
  * the implications!
  */
-#define  USB_CFG_DEVICE_ID       0xdc, 0x05 /* = 0x05dc = 1500 */
+#define  USB_CFG_DEVICE_ID       0xdf, 0x05 /* = 0x05dc = 1500 */
 /* This is the ID of the product, low byte first. It is interpreted in the
  * scope of the vendor ID. If you have registered your own VID with usb.org
  * or if you have licensed a PID from somebody else, define it here. Otherwise
@@ -243,8 +243,8 @@ section at the end of this file).
 #define USB_CFG_DEVICE_VERSION  0x00, 0x01
 /* Version number of the device: Minor number first, then major number.
  */
-#define USB_CFG_VENDOR_NAME     'o', 'b', 'd', 'e', 'v', '.', 'a', 't'
-#define USB_CFG_VENDOR_NAME_LEN 8
+#define USB_CFG_VENDOR_NAME     'w', 'w', 'w', '.', 'd', 'c', 't', 't', 'e', 'c', 'h', '.', 'c', 'o', 'm'
+#define USB_CFG_VENDOR_NAME_LEN 15
 /* These two values define the vendor name returned by the USB device. The name
  * must be given as a list of characters under single quotes. The characters
  * are interpreted as Unicode (UTF-16) entities.
@@ -253,8 +253,8 @@ section at the end of this file).
  * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
  * details.
  */
-#define USB_CFG_DEVICE_NAME     'T', 'e', 'm', 'p', 'l', 'a', 't', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 8
+#define USB_CFG_DEVICE_NAME     'U', 'S', 'B', 'R', 'e', 'l', 'a', 'y', '4'
+#define USB_CFG_DEVICE_NAME_LEN 9
 /* Same as above for the device name. If you don't want a device name, undefine
  * the macros. See the file USB-IDs-for-free.txt before you assign a name if
  * you use a shared VID/PID.
@@ -268,12 +268,12 @@ section at the end of this file).
  * to fine tune control over USB descriptors such as the string descriptor
  * for the serial number.
  */
-#define USB_CFG_DEVICE_CLASS        0xff    /* set to 0 if deferred to interface */
+#define USB_CFG_DEVICE_CLASS        0
 #define USB_CFG_DEVICE_SUBCLASS     0
 /* See USB specification if you want to conform to an existing device class.
  * Class 0xff is "vendor specific".
  */
-#define USB_CFG_INTERFACE_CLASS     0   /* define class here if not at device level */
+#define USB_CFG_INTERFACE_CLASS     3 /* HID */
 #define USB_CFG_INTERFACE_SUBCLASS  0
 #define USB_CFG_INTERFACE_PROTOCOL  0
 /* See USB specification if you want to conform to an existing device class or
@@ -281,7 +281,7 @@ section at the end of this file).
  * HID class is 3, no subclass and protocol required (but may be useful!)
  * CDC class is 2, use subclass 2 and protocol 1 for ACM
  */
-/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    42 */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    22
 /* Define this to the length of the HID report descriptor, if you implement
  * an HID device. Otherwise don't define it or define it to 0.
  * If you use this define, you must add a PROGMEM character array named
@@ -346,8 +346,6 @@ section at the end of this file).
  * };
  */
 
-#define CONFIG_DESCRIPTOR_SIZE 41
-
 #define USB_CFG_DESCR_PROPS_DEVICE                  0
 #define USB_CFG_DESCR_PROPS_CONFIGURATION           0
 #define USB_CFG_DESCR_PROPS_STRINGS                 0