From e4f4b33fd4e5e99a54134f45658d32e4c9202d46 Mon Sep 17 00:00:00 2001 From: claes Date: Sat, 10 Jun 2023 22:20:50 +0200 Subject: [PATCH] Updated README --- README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index a84fef8..d00b269 100644 --- a/README.md +++ b/README.md @@ -2,7 +2,8 @@ Rather than reporting all MAC addresses seen ```mqtt-arp``` takes a list of MACs to watch for. I have this configured for my phone, resulting in a reasonable proxy for whether I am home or not. ```mqtt-arp``` will report as soon as the device is seen, and send rate-limited (at most once every 2 minutes) updates when it is seen again. If the device is not seen for at least 10 minutes the location will be reported as "unknown". -There is basic configuration file support; by default ```mqtt-arp``` will read ```/etc/mqtt-arp.conf```. The following aspects can be configured at run time: +There is basic configuration file support; by default ```mqtt-arp``` will read ```/etc/mqtt-arp.conf```. The location can be overridden, see below. +The following aspects can be configured at run time: * MQTT host (-h / --host / mqtt_host) * MQTT post (-p / --port / mqtt_port) @@ -12,5 +13,6 @@ There is basic configuration file support; by default ```mqtt-arp``` will read ` * Location to report when device is present (-l / --location / location) * Path to SSL certificate bundle (-c / --capath / capath) * MAC addresses to watch for (-m / --mac / mac) + * Read config file at specific location (-f / --configfile / file path) This code is released as GPLv3+ and is available at [https://the.earth.li/gitweb/?p=mqtt-arp.git;a=summary](https://the.earth.li/gitweb/?p=mqtt-arp.git;a=summary) or on GitHub for easy whatever at [https://github.com/u1f35c/mqtt-arp](https://github.com/u1f35c/mqtt-arp) -- 2.39.2