From 69f62eb3272157eca2f045f051c44a95efca1279 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Wed, 15 Jun 2005 10:41:41 +0000 Subject: [PATCH] cscvs to tla changeset 1 Author: noodles Date: 2003/06/04 17:21:57 Initial revision git-archimport-id: noodles@earth.li--pie/autodns--mainline--1.0--base-0 --- ACKNOWLEDGEMENTS | 28 +++ HISTORY | 35 ++++ LICENSE | 280 +++++++++++++++++++++++++++++ README | 78 ++++++++ TODO | 16 ++ autodns.pl | 438 +++++++++++++++++++++++++++++++++++++++++++++ autodns.users | 3 + contrib/add-dns.pl | 148 +++++++++++++++ 8 files changed, 1026 insertions(+) create mode 100644 ACKNOWLEDGEMENTS create mode 100644 HISTORY create mode 100644 LICENSE create mode 100644 README create mode 100644 TODO create mode 100755 autodns.pl create mode 100644 autodns.users create mode 100644 contrib/add-dns.pl diff --git a/ACKNOWLEDGEMENTS b/ACKNOWLEDGEMENTS new file mode 100644 index 0000000..022deb2 --- /dev/null +++ b/ACKNOWLEDGEMENTS @@ -0,0 +1,28 @@ +Stephen White + +Provided much testing and suggestions for improvement. + + +Simon Huggins + +Answered annoying Perl questions when I was too lazy to RTFM. Fixed +various bugs (including locale stuff, deletion of domains, stricter +checking of domain validity). + + +Peter Warasin + +Provided patches to improve functionality (users file, better GPG error +checking etc). + + +Matthew Byng-Maddick + +Provided patches to improve functionality (locking, help, tidier command +processing). + + +Dominic Hargreaves + +Provided add-dns.pl, the beginning (and possibly end) of the contrib +directory. diff --git a/HISTORY b/HISTORY new file mode 100644 index 0000000..f847116 --- /dev/null +++ b/HISTORY @@ -0,0 +1,35 @@ +0.0.1 - 11th December 1999 + +* First release. + +0.0.2 - 22nd December 1999 + +* Added check to make sure there are no illegal characters in the + domain name we are adding. +* Added checking of existing zones so that it's not possible to add the + same zone twice. + +0.0.3 - 17th February 2000 + +* Added check for mail from mailer-daemon, so we don't try to parse + bounces. +* Fixed to work with use strict. +* Wrote a README. +* Forced domains into all lower case. + +0.0.4 - 12th July 2001 + +* Fixed stupid bug that meant we could add zones that already existed. +* Added HELP command. +* Added DEL command. +* Added better checking of domain syntax. +* Fixed gpg locale error (we assumed English messages for parsing). +* Added user configuration file. +* Added locking. +* Don't reply to the same address twice (cc & to). +* Better GPG error checking. +* Added contrib directory (currently with just add-dns.pl in it) + +0.0.5 - 10th November 2002 + +* Changed valid domain regex to allow 4 character TLDs (triggered by .info). diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..b2852a9 --- /dev/null +++ b/LICENSE @@ -0,0 +1,280 @@ +GNU GENERAL PUBLIC LICENSE + + Version 2, June 1991 +Copyright (C) 1989, 1991 Free Software Foundation, Inc. +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. + +Preamble + + The licenses for most software are designed to take away your freedom + to share and change it. By contrast, the GNU General Public License is + intended to guarantee your freedom to share and change free + software--to make sure the software is free for all its users. This + General Public License applies to most of the Free Software + Foundation's software and to any other program whose authors commit to + using it. (Some other Free Software Foundation software is covered by + the GNU Library General Public License instead.) You can apply it to + your programs, too. + + When we speak of free software, we are referring to freedom, not + price. Our General Public Licenses are designed to make sure that you + have the freedom to distribute copies of free software (and charge for + this service if you wish), that you receive source code or can get it + if you want it, that you can change the software or use pieces of it + in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid + anyone to deny you these rights or to ask you to surrender the rights. + These restrictions translate to certain responsibilities for you if + you distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether + gratis or for a fee, you must give the recipients all the rights that + you have. You must make sure that they, too, receive or can get the + source code. And you must show them these terms so they know their + rights. + + We protect your rights with two steps: (1) copyright the software, and + (2) offer you this license which gives you legal permission to copy, + distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain + that everyone understands that there is no warranty for this free + software. If the software is modified by someone else and passed on, + we want its recipients to know that what they have is not the + original, so that any problems introduced by others will not reflect + on the original authors' reputations. + + Finally, any free program is threatened constantly by software + patents. We wish to avoid the danger that redistributors of a free + program will individually obtain patent licenses, in effect making the + program proprietary. To prevent this, we have made it clear that any + patent must be licensed for everyone's free use or not licensed at + all. + + The precise terms and conditions for copying, distribution and + modification follow. + +TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains a + notice placed by the copyright holder saying it may be distributed + under the terms of this General Public License. The "Program", below, + refers to any such program or work, and a "work based on the Program" + means either the Program or any derivative work under copyright law: + that is to say, a work containing the Program or a portion of it, + either verbatim or with modifications and/or translated into another + language. (Hereinafter, translation is included without limitation in + the term "modification".) Each licensee is addressed as "you". + + Activities other than copying, distribution and modification are not + covered by this License; they are outside its scope. The act of + running the Program is not restricted, and the output from the Program + is covered only if its contents constitute a work based on the Program + (independent of having been made by running the Program). Whether that + is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's source + code as you receive it, in any medium, provided that you conspicuously + and appropriately publish on each copy an appropriate copyright notice + and disclaimer of warranty; keep intact all the notices that refer to + this License and to the absence of any warranty; and give any other + recipients of the Program a copy of this License along with the + Program. + + You may charge a fee for the physical act of transferring a copy, and + you may at your option offer warranty protection in exchange for a + fee. + + 2. You may modify your copy or copies of the Program or any portion of + it, thus forming a work based on the Program, and copy and distribute + such modifications or work under the terms of Section 1 above, + provided that you also meet all of these conditions: + + * a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + * b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + * c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but does + not normally print such an announcement, your work based on the + Program is not required to print an announcement.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the Program, + and can be reasonably considered independent and separate works in + themselves, then this License, and its terms, do not apply to those + sections when you distribute them as separate works. But when you + distribute the same sections as part of a whole which is a work based + on the Program, the distribution of the whole must be on the terms of + this License, whose permissions for other licensees extend to the + entire whole, and thus to each and every part regardless of who wrote + it. + + Thus, it is not the intent of this section to claim rights or contest + your rights to work written entirely by you; rather, the intent is to + exercise the right to control the distribution of derivative or + collective works based on the Program. + + In addition, mere aggregation of another work not based on the Program + with the Program (or with a work based on the Program) on a volume of + a storage or distribution medium does not bring the other work under + the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, + under Section 2) in object code or executable form under the terms of + Sections 1 and 2 above provided that you also do one of the following: + * a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software + interchange; or, + * b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + * c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + + The source code for a work means the preferred form of the work for + making modifications to it. For an executable work, complete source + code means all the source code for all modules it contains, plus any + associated interface definition files, plus the scripts used to + control compilation and installation of the executable. However, as a + special exception, the source code distributed need not include + anything that is normally distributed (in either source or binary + form) with the major components (compiler, kernel, and so on) of the + operating system on which the executable runs, unless that component + itself accompanies the executable. + + If distribution of executable or object code is made by offering + access to copy from a designated place, then offering equivalent + access to copy the source code from the same place counts as + distribution of the source code, even though third parties are not + compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program + except as expressly provided under this License. Any attempt otherwise + to copy, modify, sublicense or distribute the Program is void, and + will automatically terminate your rights under this License. However, + parties who have received copies, or rights, from you under this + License will not have their licenses terminated so long as such + parties remain in full compliance. + + 5. You are not required to accept this License, since you have not + signed it. However, nothing else grants you permission to modify or + distribute the Program or its derivative works. These actions are + prohibited by law if you do not accept this License. Therefore, by + modifying or distributing the Program (or any work based on the + Program), you indicate your acceptance of this License to do so, and + all its terms and conditions for copying, distributing or modifying + the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the + Program), the recipient automatically receives a license from the + original licensor to copy, distribute or modify the Program subject to + these terms and conditions. You may not impose any further + restrictions on the recipients' exercise of the rights granted herein. + You are not responsible for enforcing compliance by third parties to + this License. + + 7. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent issues), + conditions are imposed on you (whether by court order, agreement or + otherwise) that contradict the conditions of this License, they do not + excuse you from the conditions of this License. If you cannot + distribute so as to satisfy simultaneously your obligations under this + License and any other pertinent obligations, then as a consequence you + may not distribute the Program at all. For example, if a patent + license would not permit royalty-free redistribution of the Program by + all those who receive copies directly or indirectly through you, then + the only way you could satisfy both it and this License would be to + refrain entirely from distribution of the Program. + + If any portion of this section is held invalid or unenforceable under + any particular circumstance, the balance of the section is intended to + apply and the section as a whole is intended to apply in other + circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of any + such claims; this section has the sole purpose of protecting the + integrity of the free software distribution system, which is + implemented by public license practices. Many people have made + generous contributions to the wide range of software distributed + through that system in reliance on consistent application of that + system; it is up to the author/donor to decide if he or she is willing + to distribute software through any other system and a licensee cannot + impose that choice. + + This section is intended to make thoroughly clear what is believed to + be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in + certain countries either by patents or by copyrighted interfaces, the + original copyright holder who places the Program under this License + may add an explicit geographical distribution limitation excluding + those countries, so that distribution is permitted only in or among + countries not thus excluded. In such case, this License incorporates + the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new + versions of the General Public License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the Program + specifies a version number of this License which applies to it and + "any later version", you have the option of following the terms and + conditions either of that version or of any later version published by + the Free Software Foundation. If the Program does not specify a + version number of this License, you may choose any version ever + published by the Free Software Foundation. + + 10. If you wish to incorporate parts of the Program into other free + programs whose distribution conditions are different, write to the + author to ask for permission. For software which is copyrighted by the + Free Software Foundation, write to the Free Software Foundation; we + sometimes make exceptions for this. Our decision will be guided by the + two goals of preserving the free status of all derivatives of our free + software and of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO + WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. + EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR + OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY + KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE + PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME + THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN + WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY + AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU + FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR + CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE + PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING + RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A + FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF + SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + DAMAGES. + +END OF TERMS AND CONDITIONS \ No newline at end of file diff --git a/README b/README new file mode 100644 index 0000000..e87cba5 --- /dev/null +++ b/README @@ -0,0 +1,78 @@ +autodns 0.0.4 - A program to aid auto addition of secondary DNS. +Copyright 1999-2001 Jonathan McDowell for Project Purple. +http://www.earth.li/projectpurple/progs/autodns.html + + +Introduction: + +AutoDNS is a simple Perl script designed to allow the easy addition of +secondary DNS zones controlled via email. + +The principle is simple. AutoDNS accepts a GPG clear signed email on +stdin, so can simply be added to a .forward file or whatever. You +configure it to know about the key IDs of all the people you wish to be +able to setup secondaries on your server and add their keys to the GPG +keyring for the user it runs under. + +Most of the configuration options are at the top of autodns.pl, just +after where VERSION is defined. The other bit of config that's needed is +a users file. + +You'll also need a way for the script to be able to do a "ndc reconfig" +to load the info about the new secondary domains - I do this using sudo. + +The format of commands to AutoDNS is very simple. It current accepts 5 +commands: + +BEGIN + Indicate the beginning of a block of commands. +END + Indicate the end of a block of commands. +ADD + Add to the list of secondaried domains. +DEL + Delete from the list of secondaried domains, assuming + it's owned by the current user and is being secondaried + currently. +LIST + List secondaried domains. +HELP + Show basic help. + +So a typical email would contain: + +BEGIN +ADD foo.bar +END + +as the body, which would then be signed with gpg --clearsign and sent. +AutoDNS will reply with the results of the commands sent to it. + + +Users file + +The users file is of a very simple format. It contains one user per +line like so: + +::: + +So an example would be: + +noodles:5B430367:0:212.135.138.190 + +Lines beginning with a '#' are treated as comments. See autodns.users in +the tarball for an example. + + +Contacting the author: + +I can be reached as noodles@earth.li or on Fidonet as Jonathan McDowell +@ 2:443/21 + +All constructive criticism about autodns is welcome. + + +License: + +autodns is distributed under the GNU Public License, a copy of which +should have been provided with this archive as LICENSE. diff --git a/TODO b/TODO new file mode 100644 index 0000000..65cae4a --- /dev/null +++ b/TODO @@ -0,0 +1,16 @@ +* MIME PGP support (so it'll work nicely with mutt). + +* man page. + +* Check nameserver is alive afterwards. + +* Different priviledge levels (users allowed to change master server IP, + allowed to list/delete any domain etc) + +* Restructure to be more modular and cleaner code. + +* Configuration file. + +* Web interface? + +* More (better) documentation? diff --git a/autodns.pl b/autodns.pl new file mode 100755 index 0000000..9a739d0 --- /dev/null +++ b/autodns.pl @@ -0,0 +1,438 @@ +#!/usr/bin/perl -Tw +# autodns 0.0.5 +# Copyright 1999-2001 Project Purple. Written by Jonathan McDowell +# See ACKNOWLEDGEMENTS file for full details of contributors. +# http://www.earth.li/projectpurple/progs/autodns.html +# Released under the GPL. + +use strict; +use IPC::Open3; +use Fcntl qw(:flock); + +$ENV{'PATH'}="/usr/local/bin:/usr/bin:/bin:/usr/sbin"; + +my ($from, $subject, $gpguser, $gpggood, $usersfile, $lockfile, $priv); +my ($user, $server, $inprocess, $delcount, $addcount, $reload_command); +my ($domain, @MAIL, @GPGERROR, @COMMANDS, %zones); +my ($me, $ccreply, $conffile, $domainlistroot, @cfgfiles, $VERSION); + +$VERSION="0.0.5"; + +# +# Local configuration here (until it gets moved to a config file). +# +# These are sort of suitable for a Debian setup. +# + +# Who I should reply as. +$me="autodns\@earth.li"; + +# Who replies should be CCed to. +$ccreply="noodles\@earth.li"; + +# Where to look for zones we're already hosting. +@cfgfiles=("/etc/bind/named.conf", + "/etc/bind/named.secondary.conf"); + +# The file we should add/delete domains from. +$conffile="/etc/bind/named.secondary.conf"; + +# The file that contains details of the authorized users. +$usersfile="/etc/bind/autodns.users"; + +# Base file name to for list of users domains. +$domainlistroot="/etc/bind/domains."; + +# The lockfile we use to ensure we have exclusive access to the +# $domainlistroot$user files and $conffile. +$lockfile="/etc/bind/autodns.lck"; + +# The command to reload the nameserver domains list. +$reload_command="sudo ndc reconfig 2>&1"; + +### +### There should be no need to edit anything below (unless you're not +### using BIND). This statement might even be true now - let me know if not. +### + +# +# Try to figure out what zones we currently know about by parsing config +# files. Sets the item in %zones to 1 for each zone it finds. +# +# Call with the name of a config file to read: +# +# &getzones("/etc/named.conf"); +# +sub getzones { + my ($namedfile) = @_; + + open (NAMEDCONF, "< $namedfile") or + &fatalerror("Can't open $namedfile"); + + while () { + if (/^\s*zone\s*"([^"]+)"/) { + $zones{$1}=1; + } + } + + close NAMEDCONF; +} + +# +# Check that a domain is only made up of valid characters. +# +# These are: a-z, 0-9, - or . +# +sub valid_domain { + my $domain = shift; + $domain = lc $domain; + if ($domain =~ /^(?:[a-z0-9-]+\.)+[a-z]{2,4}$/) { + return 1; + } else { + return 0; + } +} + +# +# Deal with a fatal error by printing an error message, closing the pipe to +# sendmail and exiting. +# +# fatalerror("I'm melting!"); +# +sub fatalerror { + my $message = shift; + + print REPLY $message; + close(REPLY); + + flock(LOCKFILE, LOCK_UN); + close(LOCKFILE); + unlink($lockfile); + +# die $message; + exit; +} + +# +# Get user details from usersfile based on a PGP ID. +# +# A users entry looks like: +# +# ::: +# +# Priviledge level is not currently used. +# +# ($user, $priv, $server) = &getuserinfo("5B430367"); +# +sub getuserinfo { + my $gpguser = shift; + my ($user, $priviledge, $server); + + open (CONFIGFILE, "< $usersfile") or + &fatalerror("Couldn't open user configuration file."); + + foreach () { + if (/^([^#.]+):$gpguser:(\d+):(.+)$/) { + $user=$1; + $priviledge=$2; + $server=$3; + chomp $user; + chomp $priviledge; + chomp $server; + + if ($user !~ /^.+$/) { + close(CONFIGFILE); + &fatalerror("Error in user configuration file: Can't get username.\n"); + } + + if ($server !~ /^(\d{1,3}\.){3}\d{1,3}$/) { + $server =~ s/\d\.]//g; + close(CONFIGFILE); + &fatalerror("Error in user configuration file: Invalid primary server IP address ($server)\n"); + exit; + } + } + } + close(CONFIGFILE); + + if ($user =~ /^$/) { + &fatalerror("User not found.\n"); + } + + return ($user, $priviledge, $server); +} + +$delcount=$addcount=$inprocess=0; + +# Read in the mail from stdin. +@MAIL=<>; + +$subject = "Reply from AutoDNS"; +# Now lets try to find out who it's from. +foreach (@MAIL) { + if (/^$/) { last; } + if (/^From: (.*)/i) { $from=$1; chomp $from;} + if (/^Subject:\s+(re:)?(.*)$/i) { $subject="Re: ".$2 if ($2);} +} + +if ((! defined($from)) || $from =~ /^$/ ) { + die "Couldn't find a from address."; +} elsif ($from =~ /mailer-daemon@/i) { + die "From address is mailer-daemon, ignoring."; +} + +if (! defined($subject)) { $subject="Reply from AutoDNS"; }; + +# We've got a from address. Start a reply. + +open(REPLY, "|sendmail -t -oem -oi") or die "Couldn't spawn sendmail"; + +print REPLY "From: $me\n"; +print REPLY "To: $from\n"; +# +# Check to see if our CC address is the same as the from address and if so +# don't CC. +# +if ($from ne $ccreply) { + print REPLY "Cc: $ccreply\n"; +} +print REPLY <; +@COMMANDS=; +close GPGERR; +close GPGOUT; + +# Check who it's from and if the signature was a good one. +$gpggood=1; +foreach (@GPGERROR) { + chomp; + if (/Signature made.* (.*)$/) { + $gpguser=$1; + } elsif (/error/) { + $gpggood = 0; + print REPLY "Some errors ocurred\n"; + } elsif (/BAD signature/) { + $gpggood = 0; + print REPLY "BAD signature!\n"; + } elsif (/public key not found/) { + $gpggood = 0; + print REPLY "Public Key not found\n"; + } +} + +# If we have an empty user it probably wasn't signed. +if (! $gpguser) { + print REPLY "Message appears not to be GPG signed.\n"; + close REPLY; + exit; +} + +# Check the signature we got was ok. +if ($gpggood) { + print REPLY "Good GPG signature found. ($gpguser)\n"; +} else { + print REPLY "Bad GPG signature!\n"; + close REPLY; + exit; +} + +# Now let's check if we know this person. +($user, $priv, $server) = &getuserinfo($gpguser); + +if (! defined($user) || ! $user) { + print REPLY "Unknown user.\n"; + close REPLY; + exit; +} + +print REPLY "Got user '$user'\n"; + +# Right. We know this is a valid user. Get a lock to ensure we have exclusive +# access to the configs from here on in. +open (LOCKFILE,">$lockfile") || + &fatalerror("Couldn't open lock file\n"); +&fatalerror("Couldn't get lock\n") unless(flock(LOCKFILE,LOCK_EX)); + +# Ok, now we should figure out what domains we already know about. +foreach my $cfgfile (@cfgfiles) { + getzones($cfgfile); +} + +foreach (@COMMANDS) { + # Remove trailing CRs and leading/trailing whitespace + chomp; + s/\r//; + s/^\s*//; + s/\s*$//; + + if ($inprocess) { + print REPLY ">>>$_\n"; + } + + if (/^$/) { + # + # Empty line, so ignore it. + # + } elsif (/^END$/) { + $inprocess=0; + } elsif (/^BEGIN$/) { + $inprocess=1; + } elsif ($inprocess && /^ADD\s+(.*)$/) { + $domain = $1; + + # Convert domain to lower case. + $domain =~ tr/[A-Z]/[a-z]/; + if (! valid_domain($domain)) { + $domain =~ s/[-a-z0-9.]//g; + print REPLY "Invalid character(s) in domain name: $domain\n"; + } elsif (defined($zones{$domain}) && $zones{$domain}) { + print REPLY "We already secondary $domain\n"; + } else { + print REPLY "Adding domain $domain\n"; + $zones{$domain}=1; + + open (DOMAINSFILE, ">>$conffile"); + print DOMAINSFILE " +### Domain added for '$user' + +zone \"$domain\" { + type slave; + masters { $server; }; + file \"secondary/$user/$domain\"; + allow-transfer { none; }; + allow-query { any; }; +};\n"; + close DOMAINSFILE; + + open (DOMAINLIST, ">>$domainlistroot$user") or + &fatalerror("Couldn't open file.\n"); + print DOMAINLIST "$domain\n"; + close DOMAINLIST; + $addcount++; + } + } elsif ($inprocess && /^DEL\s(.*)$/) { + $domain = $1; + + # Convert domain to lower case. + $domain =~ tr/[A-Z]/[a-z]/; + if (!valid_domain($domain)) { + $domain =~ s/[-a-z0-9.]//g; + print REPLY "Invalid character(s) in domain name: $domain\n"; + } elsif (!defined($zones{$domain}) || !$zones{$domain}) { + print REPLY "$domain does not exist!\n"; + } else { + print REPLY "Deleting domain $domain\n"; + my (@newcfg,$found); + + open (DOMAINLIST, "<$domainlistroot$user") or + &fatalerror("Couldn't open file $domainlistroot$user for reading: $!.\n"); + my @cfg = ; + close(DOMAINLIST); + @newcfg = grep { ! /^$domain$/ } @cfg; + if (scalar @cfg == scalar @newcfg) { + print REPLY "Didn't find $domain in $domainlistroot$user!\n"; + print REPLY "You are only allowed to delete your own domains that exist.\n"; + next; + } + + open (DOMAINLIST, ">$domainlistroot$user") or + &fatalerror("Couldn't open file $domainlistroot$user for writing: $!.\n"); + print DOMAINLIST @newcfg; + close DOMAINLIST; + + $found=0; + @newcfg=(); + open (DOMAINSFILE, "<$conffile") or + &fatalerror("Couldn't open file $conffile for reading: $!\n"); + { + local $/ = ''; # eat whole paragraphs + while () { + unless (/^\s*zone\s+"$domain"/) { + push @newcfg, $_; + } else { + $found=1; + if ($newcfg[-1] =~ /^###/) { + # remove comment and \n + pop @newcfg; + } + } + } + } # end of paragraph eating + + if (!$found) { + print REPLY "Didn't find $domain in $conffile!\n"; + next; + } + + open (DOMAINSFILE, ">$conffile") or + &fatalerror("Couldn't open $conffile for writing: $!\n"); + print DOMAINSFILE @newcfg; + close DOMAINSFILE; + $delcount++; + $zones{$domain} = 0; + } + } elsif ($inprocess && /^LIST$/) { + print REPLY "Listing domains for user $user\n"; + print REPLY "------\n"; + if (open (DOMAINLIST, "<$domainlistroot$user")) { + my $count = 0; + while () { + $count++; + print REPLY; + } + close (DOMAINLIST); + print REPLY "------\n"; + print REPLY "Total of $count domains.\n"; + } else { + print REPLY "Couldn't open $domainlistroot$user: $!\n"; + } + } elsif ($inprocess && /^HELP$/) { + print REPLY "In order to use the service, you will need to send GPG signed\n"; + print REPLY "messages.\n\n"; + print REPLY "The format of the text in these messages is important, as they represent\n"; + print REPLY "commands to autodns. Commands are formatted one per line, and enclosed\n"; + print REPLY "by \"BEGIN\" and \"END\" commands (without the quotes).\n"; + print REPLY "Current valid commands are:\n"; + print REPLY "BEGIN - begin processing.\n"; + print REPLY "END - end processing.\n"; + print REPLY "HELP - display this message.\n"; + print REPLY "LIST - show all the zones currently held by you.\n"; + print REPLY "ADD - adds the domain for processing.\n"; + print REPLY "DEL - removes the domain if you own it.\n"; + } elsif ($inprocess) { + print REPLY "Unknown command!\n"; + } +} +flock(LOCKFILE, LOCK_UN); +close(LOCKFILE); +unlink($lockfile); + +print REPLY "Added $addcount domains.\n" if $addcount; +print REPLY "Removed $delcount domains.\n" if $delcount; +if ($addcount || $delcount) { + print REPLY "Reloading nameserver config.\n"; + print REPLY `$reload_command`; +} +close REPLY; + +exit 0; diff --git a/autodns.users b/autodns.users new file mode 100644 index 0000000..56a6979 --- /dev/null +++ b/autodns.users @@ -0,0 +1,3 @@ +# ::: +noodles:5B430367:0:212.135.138.190 +testuser:12345678:0:0.0.0.0 diff --git a/contrib/add-dns.pl b/contrib/add-dns.pl new file mode 100644 index 0000000..53a0e3a --- /dev/null +++ b/contrib/add-dns.pl @@ -0,0 +1,148 @@ +#!/usr/bin/perl -w +# +# add-dns.pl version 0.0.4alpha +# Dominic Hargreaves +# +# Use this to tell nameservers supporting AutoDNS +# (http://www.earth.li/projectpurple/progs/autodns.html) to slave for you. +# +# Changelog: +# +# 03/07/01 dom: Added remotehelp and remove command for AutoDNS 0.0.4alpha +# Changed to header to ns1 (from terry) +# 22/05/01 dom: Initial code completed for AutoDNS 0.0.3 + +use strict; +use IPC::Open3; + +sub usage; + +my $sendmail = "/usr/sbin/sendmail"; +my $gpg = "/usr/bin/gpg"; + +my $to = 'dns-auto@tuschin.blackcatnetworks.co.uk, + dns-auto@ns1.blackcatnetworks.co.uk'; +#my $to = 'dom'; +my $from = 'Urchin Hostmaster '; +my $cc = $from; +#my $cc = ""; +my $keyid = "25B2616D"; +my $command; +my @validcommands = qw(add remove list remotehelp); + +# Only proceed if we have been given a valid command + +die usage unless $ARGV[0]; + +my $ok = 0; +for (@validcommands) { + if ($ARGV[0] eq $_) { + $ok = 1; + } +} + +die usage unless ($ok == 1); + +# Open gpg filehandle + +open3(\*GPGIN, \*GPGOUT, \*GPGERR, "$gpg --default-key $keyid --clearsign"); + +# Generate AutoDNS commands + +print GPGIN "BEGIN\n"; + +$command = shift(@ARGV); + +if ($command eq "list") { + print GPGIN "LIST\n"; +} elsif ($command eq "remotehelp") { + print GPGIN "HELP\n"; +} elsif ($command eq "add") { + for (@ARGV) { + print GPGIN "ADD $_\n"; + } +} elsif ($command eq "remove") { + for (@ARGV) { + print GPGIN "DEL $_\n"; + } +} else { + die usage; +} + +print GPGIN "END\n"; + +close GPGIN; + +my @gpgerror=; +my @gpgout=; +close GPGERR; +close GPGOUT; + +# Show user any error output from gpg... + +for (@gpgerror) { + print STDERR $_; +} + +# ...and what we intend to send + +for (@gpgout) { + print $_; +} + +# Ask user whether this is ok + +print "Send this mail to:\n"; +print $to; +print "\nand\n"; +print $cc; +print "\n? (y/n): "; + +my $mark = "0"; +while () { + if (/^y/i) { + $mark = "1"; + last; + } + /^n/i and last; +} + +if (!($mark eq "1")) { + print "Mail NOT sent.\n"; + exit 1; +} + +# Compose email + +open MAIL, "|$sendmail -t -oi" or die $!; +print MAIL "From: $from\n" or die "Configuration error: $!"; +print MAIL "To: $to\n" or die "Configuration error: $!"; +print MAIL "Cc: $cc\n" if $cc; +print MAIL "Subject: AutoDNS commands\n"; +print MAIL "X-Mailer: add-dns.pl 0.0.4alpha\n\n"; + +for (@gpgout) { + print MAIL $_; +} + +print MAIL "\n"; + +# Send email + +close MAIL; + +sub usage { + print< [list of domains] + +Possible commands: add: Adds domains + remove: Removes domains + list: Lists current domains + remotehelp: Requests help from remote end + +(You must have the private key $keyid in your gpg keyring +for this to work) +EOF + +} + -- 2.39.5