A hash variant that uses 8 SHA-1 instances and results in a double width
hash (320 bits instead of SHA-1's 160 bits). This was used in older
versions of PGP and there are quite a few keys on the keyservers with
signatures using it. Added mainly to enable the sig hash checking
routine to do some sanity checking on these signatures.
This was originally for pulling keys from an old pksd keyserver setup.
The code has bit-rotted and no one should have been running pksd for
years now, so just remove the backend entirely. DB4 has been the best
choice for onak backend for some time now.
Extend database backends to support fetching by key fingerprint
Up until now the database backends have supported fetching a specific
key only by 64 bit key id. We should really have been using the
fingerprint where possible. Add a new backend function, fetch_key_fp,
to allow us to fetch using the fingerprint, and a generic implementation
that just truncates the fingerprint to get the 64 bit key id (valid for
v4 only). The HKP, keyd and dynamic backends gain full passthrough
support for retrieval by fingerprint with this commit.
The key size of an elliptic curve key is given by the OID defining the
curve. Add support for understanding the OIDs listed in RFC6637 (256,
384 + 521 bits).
Old versions of GnuPG put Elgamal (type 16) keys inside v3 packets.
The method of getting the keyid for these keys was via a RIPE MD160
hash approach similar to the SHA-1 approach used in v4. While nothing
supports this these days there are keys in the public keyserver
network that contain this sort of data and if we don't parse the keyid
correctly we can't show things like self-sigs.
With the increased use of signature subkeys and the fact long
keyids are being used to do HKP lookups we need to store a mapping
of the subkey long keyids to primary key ids. Previously the fact
we did this for the 32 bit subkey id was enough. Add a new DB for
the DB4 backend that can map the 64 bit subkey ID to the 64 bit
primary key ID.
Check that libcurl supports SSL if using HKPS with HKP backend
Use CURL's runtime feature checking to ensure that we have support
for SSL before trying to use a HKPS (HTTPS) remote keyserver with
the HKP keydb backend.
Try to use a user specific configuration file if available
Try looking for $XDG_CONFIG_HOME/onak.conf (or $HOME/.config/onak.conf
if $XDG_CONFIG_HOME is not set) before looking for the system wide
config file. This allows users to use their own config file without
having to always use the -c option to provide it.
A harmless failure to cleanup the config structure before exiting
keydctl and a more major (small, but key runs for a long period of
time) leak of the search string for fetching a key by text string
in keyd.
wotsap wasn't paying attention to keys that were revoked, leading to them
being included in the output key/signature lists. Force the load of a key
before colouring it so we can ignore it if it's revoked.
The initial commit of the HKP backend just took a hostname as the "db_dir"
parameter. Extend this to cope with an http:// or hkp:// style URL, allowing
the port to be specified as well.
Clean up use of K&R style function definitions in md5.c
md5_process_block / md5_read_ctx had K&R style function definitions.
Clean them up to use ANSI C style like the rest of the code (including
other functions in that file). Spotted by Doxygen.
Switch keyd to allow multiple clients to be served at once
keyd was only accepting a single connection at a time and dealing with
all the requests from it before accepting the next client. This causes
delays in regular HKP processing while running something like wotsap on
a live keyserver.
Most of the pieces were already in place to deal with a per request select
based processing loop, so this commit switches to that model. A better
solution in the future may be to consider the use of libevent or libev,
but at present this enables the use of long runs stats programs while
still being able to service HKP requests in reasonable time.
A potential use case of onak is as a proxy server. Add an HKP backend
that uses libcurl to make requests to a remote keyserver to fetch, search
or store keys. The "db_dir" configuration parameter becomes the base
host name for the remote keyserver e.g.:
db_backend hkp
db_dir the.earth.li
In the future the addition of the ability to stack database backends
should allow this to be used to turn onak into a caching keyserver.
Wotsap (http://www.lysator.liu.se/~jc/wotsap/) is a web of trust
statistics and pathfinding tool. It takes a set of preformatted key
data covering the primary UID and signatures on each key.
This commit adds a tool which will generate the file data required for
wotsap. These files still need ar/bzip2 run against them in order to
be fed into wotsap, but are generated from the live keyring data.
Sufficiently recent versions of nettle have support for RIPEMD160 and
there are various keys in the wild that use this algorithm, so add an
autoconf check for the nettle support and use it if it's available.
Add -c option to maxpath / sixdegrees to specify config file
maxpath + sixdegrees weren't allowing a config file to be specified
in the same fashion as onak. Add the -c option so they do so, which
helps when using these tools in a non-system install setup.
Prevent read_openpgp_stream from returning empty packets
If read_openpgp_stream got an invalid packet that had a semi valid
header it could potentially return an empty package, which would
confuse splitkeys. Cleanup the final package returned if it turns
out we didn't have valid data for it.
Only seed initial Debian package database if key file is available.
If the Debian package detected no keyring database on installation it
would seed the database with my key, from
/usr/share/doc/onak/noodles.key.gz. This is against Debian policy 12.3 -
packages cannot require files from /usr/share/doc/ to function. Only
seed the database if the file exists, avoiding issues installing when
skipping /usr/share/doc/
Start pulling non-library material out of core source files
As part of moving towards a libonak start pulling things that are related
to the onak keyserver out of the core PGP related source files. Start
with logthing, our logging framework, instead moving towards an onak_status_t
enum to allow up to bubble up errors to the caller.
Massage the existing function/structure comments into something that
Doxygen likes, and document a few additional bits and pieces that
Doxygen was complaining about.
Signatures include the first 2 octets of the hash the signature is
over. Checking this matches what we expect is an easy way to drop
corrupt or incorrect signatures. It doesn't provide any cryptographic
verification but is a useful sanity check when accepting keys.
Avoid race condition when receiving incoming mails
There's a race condition between us starting to accept a new incoming
mail and taking the lock to start processing it; a second copy of
onak-mail may come in and start to process the incomplete mail we're
in the process of receiving. Receive to a tmp file and rename to .onak
after we've received everything.
Fixes Debian bug #650557. Thanks to Helmut Grohne <helmut@subdivi.de>
GPG 1.4.12 switches to using the full fingerprint of a key when requesting
a refresh (commit 6fe25e5602fabe92c68e5ba30e4777221e8612df). We were only
supporting retrieval by 32 or 64 bit key ID. Detect when we're passed a
fingerprint and truncate it to the last 64 bits so we can look it up.
In the future we probably want to extend to being able to do lookups by
full fingerprint.
Use nettle for hashing when available rather than internal MD5/SHA1 routines
Change the internal MD5/SHA1 routines to match nettle's name and
calling convention and add suitable autoconf bits to auto-select
nettle if it's available, otherwise fall back to the internal
routines as usual.
Not so much of an issue for MD5/SHA1 (though we might end up with
more optimised routines in some instances), but allows easier use
of other hashing/crypto functions in the future.
Add some more subpacket types to the list to ignore
There are various signature subpacket types we know about, but have
no need to decode (or it doesn't make sense to decode if we're not
checking that the signature is valid). Add some more to prevent
warnings when adding keys that have these subpackets present.
Project Purple isn't a legal entity; credit primary author of files
and include a minimal GPL 2 header in each file rather than relying
on the copy of LICENCE shipped with everything else.
Add /pks/hashquery - an implementation of the SKS hash retrieval
portion of the gossip protocol.
hashquery takes a marshalled array of SKS hashes to retrieve and
returns a marshalled array of the keys requested.
(The marshalling functions essentially take the hash/key structures
and flatten them to a byte stream with a preceding network order
32 bit size value.)
Add support for displaying/retrieving by SKS hash to lookup and onak CLI
Now we are storing the SKS hash details of a key add the ability to
display the hash in /pks/lookup and retrieve it via the new hget
function. This should be compatible with the way in which SKS extends
lookup to support its hashes.
Also add hget to the onak CLI tool and the -s option for showing the
SKS hash of keys.
Add a new backend DB function fetch_key_skshash and implement it
for the fs/db4/keyd & dynamic backends. This allows us to retrieve
a key using the SKS hash, which will be necessary to implement the
gossip protocol.
SKS uses an MD5 hash over the sorted packets from a key as a token
for its gossip protocol. Add support for calculating this hash and a
structure for passing it around within onak.
Make compare_packet follow memcmp semantics and export to other modules
compare_packet is potentially useful elsewhere, but rather than a
true/false comparison provide -1/0/1 for less than/equal/greater
than, as memcmp does.
Fix buffer_getchar to only error if we'd exceed the buffer size
We were erroring when we retrieved the end of the buffer, and not
if we overflowed past the end. Check if we'd overflow and return
an error only in that case.
Change to using void * for character function content parameter
We were passing unsigned char * as the parameter to all of the
character fetching/putting functions. Use void * instead so that
we can pass other types of data without needlessly having to cast.
Output details of key search after retrieval for pks/lookup
Rather than logging what we're searching for beforehand, and then
indicating failure after (but not success), just output the results
and search details after retrieval.
projects / onak.git / log