Previous | Contents | Index | Next
Plink (PuTTY Link) is a command-line connection tool similar to UNIX
ssh. It is mostly used for automated operations, such as making CVS access a repository on a remote server.
Plink is probably not what you want if you want to run an interactive session in a console window.
Plink is a command line application. This means that you cannot just double-click on its icon to run it and instead you have to bring up a console window. In Windows 95, 98, and ME, this is called an ‘MS-DOS Prompt’, and in Windows NT, 2000, and XP, it is called a ‘Command Prompt’. It should be available from the Programs section of your Start Menu.
In order to use Plink, the file
plink.exe will need either to be on your
PATH or in your current directory. To add the directory containing Plink to your
PATH environment variable, type into the console window:
This will only work for the lifetime of that particular console window. To set your
PATH more permanently on Windows NT, 2000, and XP, use the Environment tab of the System Control Panel. On Windows 95, 98, and ME, you will need to edit your
AUTOEXEC.BAT to include a
set command like the one above.
This section describes the basics of how to use Plink for interactive logins and for automated processes.
Once you've got a console window to type into, you can just type
plink on its own to bring up a usage message. This tells you the version of Plink you're using, and gives you a brief summary of how to use Plink:
Z:\sysosd>plink PuTTY Link: command-line connection utility Release 0.61 Usage: plink [options] [user@]host [command] ("host" can also be a PuTTY saved session name) Options: -V print version information and exit -pgpfp print PGP key fingerprints and exit -v show verbose messages -load sessname Load settings from saved session -ssh -telnet -rlogin -raw -serial force use of a particular protocol -P port connect to specified port -l user connect with specified username -batch disable all interactive prompts The following options only apply to SSH connections: -pw passw login with specified password -D [listen-IP:]listen-port Dynamic SOCKS-based port forwarding -L [listen-IP:]listen-port:host:port Forward local port to remote address -R [listen-IP:]listen-port:host:port Forward remote port to local address -X -x enable / disable X11 forwarding -A -a enable / disable agent forwarding -t -T enable / disable pty allocation -1 -2 force use of particular protocol version -4 -6 force use of IPv4 or IPv6 -C enable compression -i key private key file for authentication -noagent disable use of Pageant -agent enable use of Pageant -m file read remote command(s) from file -s remote command is an SSH subsystem (SSH-2 only) -N don't start a shell/command (SSH-2 only) -nc host:port open tunnel in place of session (SSH-2 only) -sercfg configuration-string (e.g. 19200,8,n,1,X) Specify the serial configuration (serial only)
Once this works, you are ready to use Plink.
To make a simple interactive connection to a remote server, just type
plink and then the host name:
Z:\sysosd>plink login.example.com Debian GNU/Linux 2.2 flunky.example.com flunky login:
You should then be able to log in as normal and run a session. The output sent by the server will be written straight to your command prompt window, which will most likely not interpret terminal control codes in the way the server expects it to. So if you run any full-screen applications, for example, you can expect to see strange characters appearing in your window. Interactive connections like this are not the main point of Plink.
In order to connect with a different protocol, you can give the command line options
-raw. To make an SSH connection, for example:
Z:\sysosd>plink -ssh login.example.com login as:
If you have already set up a PuTTY saved session, then instead of supplying a host name, you can give the saved session name. This allows you to use public-key authentication, specify a user name, and use most of the other features of PuTTY:
Z:\sysosd>plink my-ssh-session Sent username "fred" Authenticating with public key "fred@winbox" Last login: Thu Dec 6 19:25:33 2001 from :0.0 fred@flunky:~$
(You can also use the
-load command-line option to load a saved session; see section 18.104.22.168. If you use
-load, the saved session exists, and it specifies a hostname, you cannot also specify a
user@host argument - it will be treated as part of the remote command.)
More typically Plink is used with the SSH protocol, to enable you to talk directly to a program running on the server. To do this you have to ensure Plink is using the SSH protocol. You can do this in several ways:
-sshoption as described in section 7.2.1.
PLINK_PROTOCOLto the word
Usually Plink is not invoked directly by a user, but run automatically by another process. Therefore you typically do not want Plink to prompt you for a user name or a password.
Next, you are likely to need to avoid the various interactive prompts Plink can produce. You might be prompted to verify the host key of the server you're connecting to, to enter a user name, or to enter a password.
To avoid being prompted for the server host key when using Plink for an automated connection, you should first make a manual connection (using either of PuTTY or Plink) to the same server, verify the host key (see section 2.2 for more information), and select Yes to add the host key to the Registry. After that, Plink commands connecting to that server should not give a host key prompt unless the host key changes.
To avoid being prompted for a user name, you can:
-loption to specify a user name on the command line. For example,
plink login.example.com -l fred.
To avoid being prompted for a password, you should almost certainly set up public-key authentication. (See chapter 8 for a general introduction to public-key authentication.) Again, you can do this in two ways:
Once you have done all this, you should be able to run a remote command on the SSH server machine and have it execute automatically with no prompting:
Z:\sysosd>plink login.example.com -l fred echo hello, world hello, world Z:\sysosd>
Or, if you have set up a saved session with all the connection details:
Z:\sysosd>plink mysession echo hello, world hello, world Z:\sysosd>
Then you can set up other programs to run this Plink command and talk to it as if it were a process on the server machine.
Plink accepts all the general command line options supported by the PuTTY tools. See section 3.8.3 for a description of these options.
Plink also supports some of its own options. The following sections describe Plink's specific command-line options.
-batch: disable all interactive prompts
If you use the
-batch option, Plink will never give an interactive prompt while establishing the connection. If the server's host key is invalid, for example (see section 2.2), then the connection will simply be abandoned instead of asking you what to do next.
This may help Plink's behaviour when it is used in automated scripts: using
-batch, if something goes wrong at connection time, the batch job will fail rather than hang.
-s: remote command is SSH subsystem
If you specify the
-s option, Plink passes the specified command as the name of an SSH ‘subsystem’ rather than an ordinary command line.
(This option is only meaningful with the SSH-2 protocol.)
Once you have set up Plink to be able to log in to a remote server without any interactive prompting (see section 7.2.2), you can use it for lots of scripting and batch purposes. For example, to start a backup on a remote machine, you might use a command like:
plink root@myserver /etc/backups/do-backup.sh
Or perhaps you want to fetch all system log lines relating to a particular web area:
plink mysession grep /~fred/ /var/log/httpd/access.log > fredlog
Any non-interactive command you could usefully run on the server command line, you can run in a batch file using Plink in this way.
To use Plink with CVS, you need to set the environment variable
CVS_RSH to point to Plink:
You also need to arrange to be able to connect to a remote host without any interactive prompts, as described in section 7.2.2.
You should then be able to run CVS as follows:
cvs -d :ext:user@sessionname:/path/to/repository co module
If you specified a username in your saved session, you don't even need to specify the ‘user’ part of this, and you can just say:
cvs -d :ext:sessionname:/path/to/repository co module
Plink can also be used with WinCVS. Firstly, arrange for Plink to be able to connect to a remote host non-interactively, as described in section 7.2.2.
Then, in WinCVS, bring up the ‘Preferences’ dialogue box from the Admin menu, and switch to the ‘Ports’ tab. Tick the box there labelled ‘Check for an alternate
rsh name’ and in the text entry field to the right enter the full path to
plink.exe. Select ‘OK’ on the ‘Preferences’ dialogue box.
Next, select ‘Command Line’ from the WinCVS ‘Admin’ menu, and type a CVS command as in section 7.4, for example:
cvs -d :ext:user@hostname:/path/to/repository co module
or (if you're using a saved session):
cvs -d :ext:user@sessionname:/path/to/repository co module
Select the folder you want to check out to with the ‘Change Folder’ button, and click ‘OK’ to check out your module. Once you've got modules checked out, WinCVS will happily invoke plink from the GUI for CVS operations.
If you want to provide feedback on this manual or on the PuTTY tools themselves, see the Feedback page.[PuTTY release 0.61]