]> the.earth.li Git - temper-clone.git/log
temper-clone.git
6 years agoAdd basic Makefile targeting Digispark
Jonathan McDowell [Tue, 1 May 2018 17:32:39 +0000 (18:32 +0100)]
Add basic Makefile targeting Digispark

Assumes the existence of a main.c containing the main code, and
builds the rest of the V-USB code with it.

6 years agoUse existing OSCCAL as starting point for calibration
Jonathan McDowell [Sat, 14 Jan 2017 11:41:14 +0000 (11:41 +0000)]
Use existing OSCCAL as starting point for calibration

If we're being loaded from micronucleus it will have already
performed calibration on OSCCAL, so use that as the starting point
for our recalibration. This seems to improve things on an older Dell
host that previously had issues enumerating the device.

6 years agoMove to micronucleus assembly for OSCCAL calibration
Jonathan McDowell [Sat, 14 Jan 2017 01:07:09 +0000 (01:07 +0000)]
Move to micronucleus assembly for OSCCAL calibration

Some issues have been observed with OSCCAL calibration on older Dell
hosts. The micronucleus firmware enumerates correctly, but the Riso
clone then fails. Move to the assembly calibration code from
micronucleus to try and improve the situation.

Imported from https://github.com/micronucleus/micronucleus.git,
commit 7a53ce9e539a18fb46f7dc8e759f14833b10cc0c (July 31st 2016).

7 years agoAdd .gitignore file
Jonathan McDowell [Wed, 18 May 2016 17:22:51 +0000 (18:22 +0100)]
Add .gitignore file

8 years agoInclude usbdrv.h in osccal.c for usbMeasureFrameLength definition
Jonathan McDowell [Wed, 18 May 2016 10:19:56 +0000 (11:19 +0100)]
Include usbdrv.h in osccal.c for usbMeasureFrameLength definition

8 years agoAdd license file (GPLv3)
Jonathan McDowell [Wed, 18 May 2016 08:53:09 +0000 (09:53 +0100)]
Add license file (GPLv3)

8 years agoInitial import of V-USB as base
Jonathan McDowell [Wed, 18 May 2016 08:51:50 +0000 (09:51 +0100)]
Initial import of V-USB as base

Import V-USB from https://github.com/obdev/v-usb.git, commit
39202048ea1fb7d14a5970c805ffd5f0b7f0fcdf (September 4th 2015).